About NEA
NEA News
Contact NEA
  Browse Feeder Models
   View All Feeders
   Multi Pitch
   HP Gold Plus
   HP Gold
   MidRange Silver
   MidRange Black

Browse Equipment Type
   Reflow Ovens
   Screen Printers
   SMT Chip Shooters
   SPI Inspection
   SMT Placement
   Through Hole
   Wave Solder


Functional Description
Procedures and Adjustments Theory of Operation / Sequence of Events The High Performance Spliceable (Gold Plus) feeder advances components from a Reel Holder to the Peel Edge on the Window where the Mylar (cover) tape is removed. The components are then advanced to the feeder pick-up position, where they wait for pickup by the machine.
The subsections that follow contain the procedures required for proper feeder operation. Power is supplied to the feeder from the feeder interface by means of the Pogo Block's two (2) bottom pins. At power-up, the feeder's Controller Board activates the Control Panel, which is verified by the illumination of the LED / status light. In this “ready” mode, the feeder stands idle waiting for a signal from the placement machine to advance. The signal is transported through the top two (2) pins of the Pogo Block. After the signal is sent by the placement machine, the feeder indexes with the following operational
The feeder's Drive Motor is activated for component tape advancement.
The Drive Motor engages a series of gears that advance the component tape as well as peeling the Mylar cover tape.
The Slot Sensor, in combination with the Toothplate, ensures proper tape index and positioning.
The feeder's carrier tape and cover tape Drive Motor shut off.
The feeder signals the placement machine that the feeder index is complete.
The feeder waits for the next index signal after a component has been picked.
8mm High Performance (Gold) Spliceable
8mm High Performance (Gold) Spliceable

Platform: GSM-Avantis-Genesis
Part #: 50934703
Style: Embossed/Paper
Model: HP Gold
Pan Size: 13
Slots: 1
Pitch: 2-4-8

View PDF Support File

 Email to a Friend
 Add to wish list